• John Deere 8760 4WD Tractor, Serial #2659, approx., 8,014., hrs., 20.8-38 steel duals, triple hyd., 24 speed.

• John Deere 8630 4WD Tractor, Serial #8899, approx., 10,150 hrs., 20.8-38 steel duals, triple hyd., 3 pt, PTO. (50 Series engine replacement at 6,967 hrs.)

• 2000 New Holland 8970 MFWD Tractor, Serial #D421014, 520/85R42 rear rubber, 16.9-30 fronts, full rack front weights, 4 hyd., approx., 6002 hrs.

• John Deere 7610 Tractor, Serial #10645, power quad trans, 18.4R-38 single rear rubber, 11.00-16 fronts, triple hyd., 3 pt., power take-off, approx., 6,323 hrs. Koyker Model 510 FE loader, 7' bucket. Loader & tractor offered separately then collectively.

• 1977 John Deere 4430 Tractor, approx., 7,300 hrs., quad range trans, 3 pt., PTO, 18.4-38 tires. Sells/JD 158 FE loader/joystick.

• John Deere 4630 Tractor, Serial #10952, approx., 11,800 hrs., dual hyd., power shift trans., 18.4-38 factory cast duals, front weights, rock shaft. (1 owner)

• John Deere 4630 Tractor, standard, Serial #28951, approx., 11,100 hrs., 20.8-38 cast duals, 11.00-16 fronts, front end weights, quad range trans., PTO.

• 1952 Massey Harris 44 Tractor/loader.

• John Deere 7720 Titan II Combine, Serial #610807, approx., 2,865 actual hrs., straw chopper, hydrostat drive, 24.5-32 drive tires. Sells/JD 224 platform, 24'.

• John Deere 7720 Combine, Serial #556808, approx., 1,721 actual hrs., straw chopper, hydrostat drive, 24.5-32 drive tires. Sells/JD224 platform, 24'. Platforms will sell/single axle header trailer.

• 230 rigid platform/pu reel. Serial #600135

• John Deere 212 pu platform, plastic fi ngers.

• 1991 Freightliner, Model FLD, 60 Series Detroit, 11.R liter, 350 hp., 295/5R225 rubber, air ride susp., air slide 5th wheel, 60" sleeper, 9 sp., Eaton trans.

• 1974 Chevy C60 Tandem Truck, 366 engine, 5-sp, 2-sp, 900-20 tires, 22' steel bed, 40" sides/12" extensions.

• 1964 IHC 1600 Loadstar, 20' grain bed/hoist, 4-sp., 2-sp axle, 8.25-20 front, 900-20 rear, 32" grain sides.

• 74' Chevy Grain Truck, rigged for hyd., drill fi ll, 10.00-20 tires.

• 68' Chevy Grain Truck, rigged for hydr., drill fi ll, 10.00-20 tires.

• 2005 Chevy 2500 HD ext., cab, approx., 156,700 miles, 4x4, cruise, auto trans., 6.6 Duramax cab & chassis.

• 2000 Ford F-350 XLT, Super Duty SRW, crew cab, 4x4, 7.3 power stroke diesel, Cannonball bale bed, pw/pl, approx., 163,400 miles, grill guard, 9900 GVW.

• 1993 Ford F-250 XLT, 4x4, Butler spike bed, 235/85R16, 5.8 ltr, gas, auto, approx., 250,500 miles, pw/pl, cruise, 8,600 GVW.

• 1993 Ford F-350, 5-sp trans., 4x4, diesel, sells/Deweze bale bed.

• 1991 Ford F-250, 2WD, gas engine, 5-sp trans.

• 2003 GMC Yukon XL, SLT, approx., 100,600 miles, 4x4, 5.3 V-8, chrome grill guard, running boards, memory heated front seats, power pedals.

• Transcraft Trailer, 48' x 96" wide, 15 strap winches, aluminum decking, spread axle, toolboxes, 285/75R24.5 rubber, air ride suspension.

• 48' x 96" wide fl at trailer/5½' extendable extension, 11R24.5 rubber, air ride suspension, ratchet strap winches, spread axle.

• 2008 Travalong aluminum 28' x 6' 8" stock trailer, set back nose, 3 compartment, side rail in front of axles, front vents, 16,470 GVW.

• 2004 Hillsboro Endura 24' x 7' aluminum stock trailer, 14,310 GVW, 3 compartment.

• Circle H gooseneck stock trailer, 20' x 6', full top, rubber fl oor, front vents.

• WW 24' x 6' frame top gooseneck stock trailer, 3 compartments, 16" tires, date of man. 4/85.

• WW 16' x 6' open top stock trailer, center gate, bumper pull, date of man. 3/85.

• 16' x 6' stock trailer, bumper pull, full top.

• Hillsboro gooseneck trailer/18' grain bed, elec/hyd., hoist, steel fl oor, 10,000 # axles, 23,500 GVW, tandem duals, 40" sides, Poorman rollover tarp, date of man., 11/80.

• Elite Flatbed Trailer, 22'/5' beaver tail, loading ramps, 7000# axles.

• Jantz triple axle combine trailer made into fl atbed/gooseneck hitch.

• Swather trailer, bumper pull, adj., runners, new 7.50-16 tires.

• Koenig utility box, 11' long, mounted on truck frame, gooseneck hook-up/adjustable coupler, dual wheels.

• Two all steel fl atbeds, 7½' x 9', gooseneck hitches.

• Krause 4950 Series, 26' double offset disk, Model 4956, 22" (m or l) front blades, 23" (m or l) rear blades.

• Big G 31' double offset disk.

• Krause 1950 Series, double offset disk, 32', new lift cyd., 21" front, 20" rear

• Miller 32' double fold offset disk.

• John Deere 331 Series double offset disk, 31'.

• John Deere 360 swinger disk, 27½.

• Crustbuster 16' single wing fold offset disk, 9" spacing, 20" (m or l) blades front, 21" (m or l) on rear.

• Wilbeck 18' single fold offset disk.

• Miller 16' offset disk, 23½" (m or L) front blades, 23½" (m or l) rear blades.

• Big G 16' offset disk.

• Sunfl ower chisel, 19 shank double fold/3 row tine harrow attach.

• 12' Chisel.

• Groheme Hamie 9 shank chisel.

• Two sets of 3600 moldboard plows, /trashboards, 5-bottom/tandem hitch.

• John Deere 3100 6-bottom moldboard plow/Durabilt plow shredders, on land hitch, trashboards.

• John Deere 3100-5-bottom moldboard plow/Durabilt plow shredders, trashboards.

• Krause cultivator Model 4133, walking tandems/Krause 3-row tine harrow, 36'.

• John Deere 48' noble springtooth.

• John Deere 60' noble.

• Baker 8100 Series springtooth/2row drag harrow, 28'.

• 28' Crustbuster springtooth.

• Pepin 60' harrow.

• Lilliston 6-row cultivator.

• John Deere 8550 folding 36' fertilizer drill, 8" spacing, 3-section.

• Great Plains folding drill, Model 510781-DDR3, Serial #2329, 51 openers, 7" spacing, 30'.

• Two - John Deere 8300 double run grain drills, 20 x 8, gang press, single disc openers/late style boot, sells/Baker hydr., folding drill hitch.

• Western pull type dry fertilizer spreader, 1000 RPM, PTO, soft spread, 6 ton.

• Parker gravity fl ow grain box, 2 compartment, mounted on truck frame, steerable front axle/single 10.00-20 front rubber and 10.00-20 duals on rear, approx., 700 bu.

• Grain auger, 30' x 6"/6½ hp., Honda gas engine.

• 16' grain auger.

• Drill fi ll auger.

• John Deere 567 large round baler, Serial #197024, surface wrap, mega wide pu, 1000 RPM/PTO.

• Hesston 4600 wire tie small square baler, Serial #3411, 540 RPM/PTO.

• Vermeer Model R-23 hydr., driven twin rake, Serial #1003112.

• Haybuster 256 plus II bale processor, Serial #941971, self loading, 1000 RPM/PTO, will handle 2 round bales.

• Hesston 1170 hydra-swing mower conditioner, 540 PTO, double sickle, rubber on steel crimper, Serial #170H00190.

• New Holland Model 116 mower conditioner, Serial #555610, 14' cut, 540 PTO, rubber on rubber crimper.

• New Holland 495 Haybine, 540 shaft, 12' cut, rubber crimpers, Serial #462285.

• New Holland Model 490 Haybine, 540 shaft, 12' cut, rubber crimpers, new wobble box recently installed, Serial #386930.

• New Holland 469 Haybine, 9', Serial #198570.

• Orange Ox inline round bale trailer, will haul eight 5' round bales, tandem axle, electric brakes, gooseneck hitch.

• CarDon 5-bale trailer, gooseneck hitch, tandem axle.

• CarDon 3-bale trailer, bumper pull.

• Shop built single round bale carrier/cable winch.

• Two 3 pt., round bale spikes.

• Several hay tarps & straps.

• Graves 20' hay elevator.

• Pop-up bale elevator.

• WW cattle working chute/Pearson self-catching headgate.

• WW cattle working chute.

• Several round bale feeders.

• Two mineral feeders.

• 12' cattle guard.

• Several feed bunks.

• Several t-posts.

• Approx., 50 electric fence posts.

• 10 welded wire panels.

• Several rolls smooth wire.

• Several rolls barb wire.

• Several 110 fence chargers.

• John Deere 709 rotary cutter.

• Case 3 pt., backhoe.

• 10' land leveler.

• Speed King land leveler, 8'.

• Three 3 pt post hole diggers.

• 3 pt., long arm boom.

• Home-made soil packer.

• 300 gal., sprayer, gas motor.

(Many of the welding supplies are new or like new. Consigned by Bruce Stansberry)

• Miller legend welder & generator.

• Lincoln 250 amp., shop welder.

• Two - H & M beveling machines.

• Several Airgas oxygen & acetylene bottles.

• Two sets of gauges.

• Wire wheels, grinding wheels, gloves, welding wire, various sizes of welding rods, hoses, tips.

• Makita cutoff saw.

• 2007 Swisher 60", 14½ hp., pull behind or beside, finish cut mower. Used approx., 20 hrs.

• John Deere L100 lawn tractor/42" cut, 17 hp., Briggs, 5-sp trans., foam fi lled tires.

• Murray lawn tractor, 52" cut, 20 hp., twin cyl., Briggs engine, 5- sp., trans.

• Troy Bilt roto tiller.

• 2003 Honda Rancher ES 350, 4x2, approx., 5,180 miles.

• 5x10 utility trailer, 3500# axle, 10" sides, fold down tailgate, all steel fl oor. (Like new)

• 2002 Hitchhiker II Four Season 5th wheel, 28', 3 slides, gooseneck hook-up.

• Several hand tools, end wrenches, sockets, come-a-longs, etc.

• Side mount pickup tool boxes.

• Assorted tool boxes.

• Century 8' fi berglass topper, black, believed to fit late model Chevy.

• 500 gal., fuel tank on stand. ~ 100 gal., fuel tank ~ fuel tank & hand pump.

• Pickup headache rack.

• Small gas engine.

• Chisels, sweeps & points.

• 45 gal., propane tractor tank ~ 4 - propane tank heaters.

• Pickup slide-in stock rack.

• Drafthorse harness ~ Horse drawn hitch cart/fl atbed wagon