• John Deere 8760 4WD Tractor, Serial #4121, approx., 8,083 hrs., 480/80R42 tires, axle mount duals, triple hyd., 24 sp. trans.

• John Deere 4840 Tractor, Serial #3235, approx., 7,782 hrs, 20.8-38 snap-on duals, engine overhaul at 6,000 hrs., power-shift, dual hyd., PTO.

• 1978 Allis 7000, Serial #8295, PTO, 3 pt., new 18.4-38 rear tires, new paint, engine overhaul approx., 70 hrs.

• David Brown Model 885 tractor, 16.9-28 rear tires, sells/3 pt. mounted, 6’ Caldwell rotary mower.

• Bobcat Model 743 Skid Steer loader, 77” bucket.

• John Deere 6600 Combine, Serial #158938, straw chopper, 23.1-6 drive tires, variable speed, shows 3,383 hrs., corn-grain-soybean-machine, sells/JD 220 platform and header trailer. Always stored inside.

• Great Plains Solid Stand 45 folding grain drill, 3 section/ press, 7.5” spacing, 45’.

• John Deere 7200 Series 12-30” planter on 2 pt., double marker, front fold for transport, furrow openers, max emerge 2 meters, seed monitors.

• 2 - Melroe Model 282 Hoe Drills, 11 x 9” spacing, hooked together/2 Kirschmann 11 x 9” spacing hoe drills. Will sell with Donahue Trailer.

• Blanchat 10-bottom moldboard plow.

• John Deere 2350-2450 6-bottom semi-mount moldboard plow/gauge wheel.

• Baker 52’ Culti-sweep, new sweeps, rolling pickers.

• 50’ Baker 7200 Culti-sweep, 26” sweeps/pickers, 27 shank.

• Krause 4830-73-R-7-shank inline ripper, pull type.

• Landoll 13 shank V-ripper, Model 600, pull type.

• Big Ox 9 shank V- ripper, 3 pt.

• Krause 740-A 24 shank, double fold, single wheel, Wako drag harrow.

• Krause 18 shank, fl ex chisel, Model 1080.

• 18 shank single wing fl ex chisel.

• John Deere 100 Series chisel, 16 shank.

• John Deere 100 Series 14 shank chisel/harrow attach.

• 16’ Flex-King offset disk.

• 54’ Noble springtooth/2 row harrow attachment.

• 40’ Baker springtooth/harrow.

• John Deere 567 large round baler, Serial #197955, net wrap, hyd., pick-up, 11,307 bales.

• 2 - John Deere 348 small square balers, wire tie.

• New Holland Model 570 wire tie small square baler, less than 15,000 bales. Serial #82342. (Nice)

• John Deere 346 wire tie small square baler.

• John Deere 346 wire tie small square baler, reconditioned, approx., 500 bales ago.

• John Deere 1600 A hydro-swing mower conditioner, Serial #989701, 16’ head, rubber on rubber crimper.

• John Deere 640 hay rake.

• New Holland 259 side delivery rake.

• 2 - Car Don 3 bale trailers, bumper pull.

• Five bale bumper pull round bale trailer.

• Agri-Tech 12’ aerator, dual carrying wheels, on hyd.

• 1999 Kenworth T 2000 60 Series Detroit Truck, 430/470 hp., super 10, trans 3.55 ratio, air ride suspension, 285/75 R24.5 rubber, approx., miles 884,000 (+/-).

• 1980 Kenworth Cabover, less than 500,000 miles, 855 Cummins, 10-speed, new batteries, 11R.22.5 rubber.

• 1977 Chevy C65 Fuel Truck, auto trans., 5-compartment, approx., 1,800 gal capacity, 9.00-20 rubber, engine work, V-8.

• 1959 International Fuel Delivery Truck, 4-compartment, approx., 1,000 gal., 8.25-20 rubber.

• 1960 Chevy 60 Series Viking Truck, 4 sp - 2 sp., V-8, 15½’ bed & hoist, steel sides, steel overlay fl oor, 8.25-20 rubber, 28” side/5½” extension.

• 1994 GMC Suburban SLE, 4 x 4, leather seats, pw/pl, 5.7 V-8, 237,350 (+/-) miles.

• 1987 Chevy Series 30, 4 x 4, cab & chasis, 4 sp., trans., 5.7 V-8, 110,600 (+/-) miles.

• 1984 Ford F-150 Pick-up, 4 x 4, 4 sp., trans., box bed.

• 1991 Wilson Cattle Pot, 50’ x 102”, floor cleated, 285/75 R24/5 rubber, aluminum outside, spring ride, crank-up deck.

• 1983 Barrett Trailer - Cattle Pot, fl oor cleated, 11R 24.5 rubber, 48’ x 96”.

• Diamond D 20’ x 6’8” gooseneck, 7000# axles, 7.50-16 tires, full nose, sliding center gate, date of man., 10-91.

• Blair 6’ x 16’ bumper pull stock trailer, sliding center gate, torsion axles, new paint.

• 16’ x 5’ stock trailer, full top.

• 40’ cattle fl oor trailer (steel), 10.00-20 rubber, LH load.

• 1979 Guthrie grain trailer, 42’, double hopper, air open hoppers.

• Lufkin 40’ fl oat trailer, steel fl oor, 10.00 x 20 tires.

• Jantz LP 12 combine trailer, 8.25-15 rubber, tandem duals.

• Jantz triple axle combine trailer/homemade gooseneck hitch.

• Home built trailer/pintle hook tongue, measures 10’ x 26’, ramps, triple axle, (built to haul round bales).

• 1990 IH Ag-Gressor DT 466, auto-trans., 1500 gal tank, 75’ boom, dry box.

• Wilson wheel corral.

• Polaris Sportsman 500, 4 x 4, camo.

• Honda Four Trac 200 SX, electric start.

• Rowse 5 yard carry all scraper/dolly wheels.

• 10’ Howse rotary cutter.

• Servis 6’, 3 pt rotary mower.

• Servis brush beater, model 84, pull type, 7’, 540 PTO.

• 6’ pull type rotary cutter.

• Fuel Tank, 120 gal.,/Tuthill 120 pump

• Square fuel tank, approx., 200 gal, Tuthill 120 pump.

• Fuel tank approx., 250 gal., Tokheim 120 pump.

• Speed King 34’ x 6” grain auger/10 hp., Kohler gas motor.

• Mayrath hyd., drill fi ll auger, slide in, 16’.

• 2 - grain augers, approx., 15’ x 6”,/3 hp., 230 v. electric motors.

• 3 - RMI 280 gal., liquid feed tanks.

• Approx., 600-800 electric fence posts.

• Approx., 15 cattle stock panels.

• 16’ aluminum gate.

• Few T-posts.

• Knapheide utility box, measures 11’ x 8’, damage on left rear corner.

• 35 disc blades, measure 21” +.

• 25 used 24’ disc blades.

• Home built wire roller, 5 hp., Briggs

• Large fire extinguisher mounted on 2-wheel cart.

• 2 - BMJ Mixer Boxes mounted on Chevy trucks.

• Mayrath Grain Auger, 61' x 10", swing away auger.

• John Bean Cattle Sprayer, 350 gal., mounted on single axle trailer.

• L2 Combine, w/ 24' platform, Serial# 13709

• Ford TW 30 Tractor, 1000 PTO, 3 pt, 20.8-38 duals, recent a/c work, sells w/ Westendorf Model TA 46 front end loader.

• 2 - WW calf cradles.

• Big Wheels Dry Box Fertilizer Spreader Mounted on GMC Truck, auto trans.